## Atlassian Confluence Data Center Helm values
#
# HEADS UP!
#
# Data loss will occur if sections declared as 'REQUIRED' are not configured appropriately!
# These sections are:
# - database
# - volumes
#
# Additional details on pre-provisioning these required resources can be found here:
# https://atlassian.github.io/data-center-helm-charts/userguide/INSTALLATION/#3-configure-database
# https://atlassian.github.io/data-center-helm-charts/userguide/INSTALLATION/#5-configure-persistent-storage
#
# To manage external access to the Confluence instance, an ingress resource can also be configured
# under the 'ingress' stanza. This requires a pre-provisioned ingress controller to be present.
#
# Additional details on pre-provisioning an ingress controller can be found here:
# https://atlassian.github.io/data-center-helm-charts/userguide/INSTALLATION/#4-configure-ingress
#
##


# -- The initial number of Confluence pods that should be started at deployment time.
# Note that Confluence requires manual configuration via the browser post deployment
# after the first pod is deployed. This configuration must be completed before
# scaling up additional pods. As such this value should always be kept as 1,
# but can be altered once manual configuration is complete.
#
replicaCount: 2

# Image configuration
#
image:

  # -- The Confluence Docker image to use
  # https://hub.docker.com/r/atlassian/confluence-server
  #
  repository: 476904493177.dkr.ecr.cn-north-1.amazonaws.com.cn/confluence
  
  # -- Image pull policy
  #
  pullPolicy: IfNotPresent
  
  # -- The docker image tag to be used - defaults to the Chart appVersion
  #
  tag: ""

# K8s ServiceAccount configuration. Give fine-grained identity and authorization
# to Pods
#
serviceAccount:

  # -- Set to 'true' if a ServiceAccount should be created, or 'false' if it
  # already exists.
  #
  create: true
  
  # -- The name of the ServiceAccount to be used by the pods. If not specified, but
  # the "serviceAccount.create" flag is set to 'true', then the ServiceAccount name
  # will be auto-generated, otherwise the 'default' ServiceAccount will be used.
  # https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server
  #
  name:

  # -- For Docker images hosted in private registries, define the list of image pull
  # secrets that should be utilized by the created ServiceAccount
  # https://kubernetes.io/docs/concepts/containers/images/#specifying-imagepullsecrets-on-a-pod
  #
  imagePullSecrets: []
  # - name: secretName

  # -- Annotations to add to the ServiceAccount (if created)
  #
  annotations: {}
  
   # Define permissions
   # https://kubernetes.io/docs/reference/access-authn-authz/rbac/#role-and-clusterrole
   #
  clusterRole:
  
    # -- Set to 'true' if a ClusterRole should be created, or 'false' if it
    # already exists.
    #
    create: true
    
    # -- The name of the ClusterRole to be used. If not specified, but
    # the "serviceAccount.clusterRole.create" flag is set to 'true',
    # then the ClusterRole name will be auto-generated.
    #
    name:
    
  # Grant permissions defined in ClusterRole
  # https://kubernetes.io/docs/reference/access-authn-authz/rbac/#rolebinding-and-clusterrolebinding
  #
  clusterRoleBinding:
  
    # -- Set to 'true' if a ClusterRoleBinding should be created, or 'false' if it
    # already exists.
    #
    create: true
    
    # -- The name of the ClusterRoleBinding to be created. If not specified, but
    # the "serviceAccount.clusterRoleBinding.create" flag is set to 'true',
    # then the ClusterRoleBinding name will be auto-generated.
    #
    name:

# REQUIRED - Database configuration
#
# Confluence requires a backend database. The configuration below can be used to define the
# database to use and its connection details.
# https://atlassian.github.io/data-center-helm-charts/userguide/CONFIGURATION/#database-connectivity
#
database:

  # -- The database type that should be used. If not specified, then it will need to be
  # provided via the browser during manual configuration post deployment. Valid values
  # include:
   # - 'postgresql'
   # - 'mysql'
   # - 'oracle'
   # - 'mssql'
  # https://atlassian.github.io/data-center-helm-charts/userguide/CONFIGURATION/#databasetype
  #
  type: "mysql"
  
  # -- The jdbc URL of the database. If not specified, then it will need to be provided
  # via the browser during manual configuration post deployment. Example URLs include:
   # - 'jdbc:postgresql://<dbhost>:5432/<dbname>'
   # - 'jdbc:mysql://<dbhost>/<dbname>'
   # - 'jdbc:sqlserver://<dbhost>:1433;databaseName=<dbname>'
   # - 'jdbc:oracle:thin:@<dbhost>:1521:<SID>'
  # https://atlassian.github.io/data-center-helm-charts/userguide/CONFIGURATION/#databaseurl
  #
  url: "jdbc:mysql://confluence-rds.cmvvr2kxdfcq.rds.cn-north-1.amazonaws.com.cn/confluence_db"
  
  # JDBC connection credentials
  #
  credentials:
  
    # -- The name of the K8s Secret that contains the database login credentials.
    # If the secret is specified, then the credentials will be automatically utilised on
    # Confluence startup. If the secret is not provided, then the credentials will need to be
    # provided via the browser during manual configuration post deployment.
    #
    # Example of creating a database credentials K8s secret below:
    # 'kubectl create secret generic <secret-name> --from-literal=username=<username> \
    # --from-literal=password=<password>'
    # https://kubernetes.io/docs/concepts/configuration/secret/#opaque-secrets
    #
    secretName: "confluence-rds-secret"
    
    # -- The key ('username') in the Secret used to store the database login username
    #
    usernameSecretKey: username
    
    # -- The key ('password') in the Secret used to store the database login password
    #
    passwordSecretKey: password
    
# REQUIRED - Volume configuration
#
# By default, the charts will configure the local-home, synchrony-home and shared-home as ephemeral
# volumes i.e. 'emptyDir: {}'. This is fine for evaluation purposes but for production
# deployments this is not ideal and so local-home, synchrony-home and shared-home should all be configured
# appropriately.
# https://atlassian.github.io/data-center-helm-charts/userguide/CONFIGURATION/#volumes
#
volumes:

  # Each pod requires its own volume for 'local-home'. This is needed for key data
  # that help define how Confluence works.
  # https://confluence.atlassian.com/doc/confluence-home-and-other-important-directories-590259707.html
  #
  localHome:
  
    # Dynamic provisioning of local-home using the K8s Storage Classes
    #
    # https://kubernetes.io/docs/concepts/storage/persistent-volumes/#dynamic
    # https://atlassian.github.io/data-center-helm-charts/examples/storage/aws/LOCAL_STORAGE/
    #
    persistentVolumeClaim:
    
      # -- If 'true', then a 'PersistentVolume' and 'PersistentVolumeClaim' will be dynamically
      # created for each pod based on the 'StorageClassName' supplied below.
      #
      create: true
      
      # -- Specify the name of the 'StorageClass' that should be used for the local-home
      # volume claim.
      #
      storageClassName: "ebs-sc"
      
      # -- Specifies the standard K8s resource requests for the local-home
      # volume claims.
      #
      resources:
        requests:
          storage: 120Gi
          
    # -- Static provisioning of local-home using K8s PVs and PVCs
    #
    # NOTE: Due to the ephemeral nature of pods this approach to provisioning volumes for
    # pods is not recommended. Dynamic provisioning described above is the prescribed
    # approach.
    #
    # When 'persistentVolumeClaim.create' is 'false', then this value can be used to define
    # a standard K8s volume that will be used for the local-home volume(s). If not defined,
    # then an 'emptyDir' volume is utilised. Having provisioned a 'PersistentVolume', specify
    # the bound 'persistentVolumeClaim.claimName' for the 'customVolume' object.
    # https://kubernetes.io/docs/concepts/storage/persistent-volumes/#static
    #
    customVolume: {}
    # persistentVolumeClaim:
    #   claimName: "<pvc>"
    
    # -- Specifies the path in the Confluence container to which the local-home volume will be
    # mounted.
    #
    mountPath: "/var/atlassian/application-data/confluence"
    
  # A volume for 'shared-home' is required by Confluence to effectively operate in multi-node
  # environment
  # https://confluence.atlassian.com/doc/set-up-a-confluence-data-center-cluster-982322030.html#SetupaConfluenceDataCentercluster-Setupandconfigureyourcluster
  #
  sharedHome:
    
    # Dynamic provisioning of shared-home using the K8s Storage Class
    #
    # https://kubernetes.io/docs/concepts/storage/persistent-volumes/#dynamic
    #
    persistentVolumeClaim:
    
      # -- If 'true', then a 'PersistentVolumeClaim' and 'PersistentVolume' will be dynamically
      # created for shared-home based on the 'StorageClassName' supplied below.
      #
      create: false
      
      # -- Specify the name of the 'StorageClass' that should be used for the 'shared-home'
      # volume claim.
      #
      storageClassName:
      
      # -- Specifies the standard K8s resource requests limits for the shared-home
      # volume claims.
      #
      resources:
        requests:
          storage: 1Gi
          
    # -- Static provisioning of shared-home using K8s PVs and PVCs
    #
    # When 'persistentVolumeClaim.create' is 'false', then this value can be used to define
    # a standard K8s volume that will be used for the shared-home volume. If not defined,
    # then an 'emptyDir' volume is utilised. Having provisioned a 'PersistentVolume', specify
    # the bound 'persistentVolumeClaim.claimName' for the 'customVolume' object.
    # https://kubernetes.io/docs/concepts/storage/persistent-volumes/#static
    # https://atlassian.github.io/data-center-helm-charts/examples/storage/aws/SHARED_STORAGE/
    #
    customVolume:
      persistentVolumeClaim:
        claimName: "confluence-shared-vol-pvc"
    # persistentVolumeClaim:
    #   claimName: "<pvc>"
    
    # -- Specifies the path in the Confluence container to which the shared-home volume will be
    # mounted.
    #
    mountPath: "/var/atlassian/application-data/shared-home"
    
    # -- Specifies the sub-directory of the shared-home volume that will be mounted in to the
    # Confluence container.
    #
    subPath:
    
    # Modify permissions on shared-home
    #
    nfsPermissionFixer:
    
      # -- If 'true', this will alter the shared-home volume's root directory so that Confluence
      # can write to it. This is a workaround for a K8s bug affecting NFS volumes:
      # https://github.com/kubernetes/examples/issues/260
      #
      enabled: true
      
      # -- The path in the K8s initContainer where the shared-home volume will be mounted
      #
      mountPath: "/shared-home"
      
      # -- By default, the fixer will change the group ownership of the volume's root directory
      # to match the Confluence container's GID (2002), and then ensures the directory is
      # group-writeable. If this is not the desired behaviour, command used can be specified
      # here.
      #
      command:

  # Each synchrony pod needs its own volume for 'synchrony-home'. The Synchrony process will write logs to that location
  # and any configuration files can be placed there.
  #
  synchronyHome:

    # Dynamic provisioning of synchrony-home using the K8s Storage Classes
    #
    # https://kubernetes.io/docs/concepts/storage/persistent-volumes/#dynamic
    # https://atlassian.github.io/data-center-helm-charts/examples/storage/aws/LOCAL_STORAGE/
    #
    persistentVolumeClaim:

      # -- If 'true', then a 'PersistentVolume' and 'PersistentVolumeClaim' will be dynamically
      # created for each pod based on the 'StorageClassName' supplied below.
      #
      create: true

      # -- Specify the name of the 'StorageClass' that should be used for the synchrony-home
      # volume claim.
      #
      storageClassName: "ebs-sc"

      # -- Specifies the standard K8s resource requests for the synchrony-home
      # volume claims.
      #
      resources:
        requests:
          storage: 80Gi

    # -- Static provisioning of synchrony-home using K8s PVs and PVCs
    #
    # NOTE: Due to the ephemeral nature of pods this approach to provisioning volumes for
    # pods is not recommended. Dynamic provisioning described above is the prescribed
    # approach.
    #
    # When 'persistentVolumeClaim.create' is 'false', then this value can be used to define
    # a standard K8s volume that will be used for the synchrony-home volume(s). If not defined,
    # then an 'emptyDir' volume is utilised. Having provisioned a 'PersistentVolume', specify
    # the bound 'persistentVolumeClaim.claimName' for the 'customVolume' object.
    # https://kubernetes.io/docs/concepts/storage/persistent-volumes/#static
    #
    customVolume: {}
    # persistentVolumeClaim:
    #   claimName: "<pvc>"

    # -- Specifies the path in the Synchrony container to which the synchrony-home volume will be
    # mounted.
    #
    mountPath: "/var/atlassian/application-data/confluence"

  # -- Defines additional volumes that should be applied to all Confluence pods.
  # Note that this will not create any corresponding volume mounts;
  # those needs to be defined in confluence.additionalVolumeMounts
  #
  additional: []

  # -- Defines additional volumes that should be applied to all Synchrony pods.
  # Note that this will not create any corresponding volume mounts;
  # those needs to be defined in synchrony.additionalVolumeMounts
  #
  additionalSynchrony: []

# Ingress configuration
#
# To make the Atlassian product available from outside the K8s cluster an Ingress
# Controller should be pre-provisioned. With this in place the configuration below
# can be used to configure an appropriate Ingress Resource.
# https://atlassian.github.io/data-center-helm-charts/userguide/CONFIGURATION/#ingress
#
ingress:

  # -- Set to 'true' if an Ingress Resource should be created. This depends on a
  # pre-provisioned Ingress Controller being available.
  #
  create: false

  # -- The class name used by the ingress controller if it's being used.
  #
  # Please follow documentation of your ingress controller. If the cluster
  # contains multiple ingress controllers, this setting allows you to control
  # which of them is used for Atlassian application traffic.
  #
  className: "nginx"
  
  # -- Set to 'true' if the Ingress Resource is to use the K8s 'ingress-nginx'
  # controller.
  # https://kubernetes.github.io/ingress-nginx/
  #
  # This will populate the Ingress Resource with annotations that are specific to
  # the K8s ingress-nginx controller. Set to 'false' if a different controller is
  # to be used, in which case the appropriate annotations for that controller must
  # be specified below under 'ingress.annotations'.
  #
  nginx: false
  
  # -- The max body size to allow. Requests exceeding this size will result
  # in an HTTP 413 error being returned to the client.
  #
  maxBodySize: 250m
  
  # -- The fully-qualified hostname (FQDN) of the Ingress Resource. Traffic coming in on
  # this hostname will be routed by the Ingress Resource to the appropriate backend
  # Service.
  #
  host:

  # -- The base path for the Ingress Resource. For example '/confluence'. Based on a
  # 'ingress.host' value of 'company.k8s.com' this would result in a URL of
  # 'company.k8s.com/confluence'. Default value is 'confluence.service.contextPath'
  path:
  
  # -- The custom annotations that should be applied to the Ingress Resource
  # when NOT using the K8s ingress-nginx controller.
  #
  annotations: {}
  
  # -- Set to 'true' if browser communication with the application should be TLS
  # (HTTPS) enforced.
  #
  https: true
  
  # -- The name of the K8s Secret that contains the TLS private key and corresponding
  # certificate. When utilised, TLS termination occurs at the ingress point where
  # traffic to the Service, and it's Pods is in plaintext.
  #
  # Usage is optional and depends on your use case. The Ingress Controller itself
  # can also be configured with a TLS secret for all Ingress Resources.
  # https://kubernetes.io/docs/concepts/configuration/secret/#tls-secrets
  # https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  #
  tlsSecretName:

# Confluence configuration
#
confluence:

  # K8s Confluence Service configuration
  #
  service:
  
    # -- The port on which the Confluence K8s Service will listen
    #
    port: 80
    
    # -- The type of K8s service to use for Confluence
    #
    type: NodePort

    # -- Use specific loadBalancerIP. Only applies to service type LoadBalancer.
    #
    loadBalancerIP:

    # -- The Tomcat context path that Confluence will use. The ATL_TOMCAT_CONTEXTPATH
    # will be set automatically.
    #
    contextPath:

    # -- Additional annotations to apply to the Service
    #
    annotations: {}

  # Standard K8s field that holds pod-level security attributes and common container settings.
  # https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
  # Do not populate when deploying to OpenShift, unless anyuid policy is attached to a service account.
  #
  securityContext:

    # -- The GID used by the Confluence docker image
    # If not supplied, will default to 2002
    # This is intended to ensure that the shared-home volume is group-writeable by the GID used by the Confluence container.
    # However, this doesn't appear to work for NFS volumes due to a K8s bug: https://github.com/kubernetes/examples/issues/260
    fsGroup: 2002

  # -- Standard K8s field that holds security configurations that will be applied to a container.
  # https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
  #
  containerSecurityContext: {}

  # -- The umask used by the Confluence process when it creates new files.
  # The default is 0022. This gives the new files:
    #  - read/write permissions for the Confluence user
    #  - read permissions for everyone else.
  #
  umask: "0022"
  
  # -- Boolean to define whether to set local home directory permissions on startup
  # of Confluence container. Set to 'false' to disable this behaviour.
  #
  setPermissions: true
  
  # Port definitions
  #
  ports:
  
    # -- The port on which the Confluence container listens for HTTP traffic
    #
    http: 8090
    
    # -- The port on which the Confluence container listens for Hazelcast traffic
    #
    hazelcast: 5701
    
  # Confluence licensing details
  #
  license:
    
    # -- The name of the K8s Secret that contains the Confluence license key. If specified, then
    # the license will be automatically populated during Confluence setup. Otherwise, it will
    # need to be provided via the browser after initial startup. An Example of creating
    # a K8s secret for the license below:
    # 'kubectl create secret generic <secret-name> --from-literal=license-key=<license>
    # https://kubernetes.io/docs/concepts/configuration/secret/#opaque-secrets
    #
    secretName:
    
    # -- The key in the K8s Secret that contains the Confluence license key
    #
    secretKey: license-key
    
  # Confirm that Confluence is up and running with a ReadinessProbe
  # https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#define-readiness-probes
  #
  readinessProbe:
  
    # -- The initial delay (in seconds) for the Confluence container readiness probe,
    # after which the probe will start running.
    #
    initialDelaySeconds: 10
    
    # -- How often (in seconds) the Confluence container readiness probe will run
    #
    periodSeconds: 5
    
    # -- The number of consecutive failures of the Confluence container readiness probe
    # before the pod fails readiness checks.
    #
    failureThreshold: 6

  # Confluence log configuration
  #
  accessLog:
  
    # -- Set to 'true' if access logging should be enabled.
    #
    enabled: true
    
    # -- The path within the Confluence container where the local-home volume should be
    # mounted in order to capture access logs.
    #
    mountPath: "/opt/atlassian/confluence/logs"
    
    # -- The subdirectory within the local-home volume where access logs should be
    # stored.
    #
    localHomeSubPath: "logs"

  # Data Center clustering
  #
  clustering:
  
    # -- Set to 'true' if Data Center clustering should be enabled
    # This will automatically configure cluster peer discovery between cluster nodes.
    #
    enabled: true
    
    # -- Set to 'true' if the K8s pod name should be used as the end-user-visible
    # name of the Data Center cluster node.
    #
    usePodNameAsClusterNodeName: true

  # Confluence Pod resource requests
  #
  resources:
  
    # JVM Memory / Heap Size definitions. The values below are based on the
    # defaults defined for the Confluence docker container.
    # https://bitbucket.org/atlassian-docker/docker-atlassian-confluence-server/src/master/#markdown-header-memory-heap-size
    #
    jvm:
    
      # -- The maximum amount of heap memory that will be used by the Confluence JVM
      #
      maxHeap: "5g"
      
      # -- The minimum amount of heap memory that will be used by the Confluence JVM
      #
      minHeap: "2g"
      
      # -- The memory reserved for the Confluence JVM code cache
      #
      reservedCodeCache: "1g"
      
    # Specifies the standard K8s resource requests and/or limits for the Confluence
    # container. It is important that if the memory resources are specified here,
    # they must allow for the size of the Confluence JVM. That means the maximum heap
    # size, the reserved code cache size, plus other JVM overheads, must be
    # accommodated. Allowing for (maxHeap+codeCache)*1.5 would be an example.
    #
    container: 
    
      requests:
        # -- Initial CPU request by Confluence pod.
        #
        cpu: "2"
        
        # -- Initial Memory request by Confluence pod
        #
        memory: "4G"

      limits:

        cpu: "4"

        memory: "6G"

  shutdown:

    # -- The termination grace period for pods during shutdown. This
    # should be set to the Confluence internal grace period (default 20
    # seconds), plus a small buffer to allow the JVM to fully terminate.
    #
    terminationGracePeriodSeconds: 25

    # -- By default pods will be stopped via a [preStop hook](https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/),
    # using a script supplied by the Docker image. If any other
    # shutdown behaviour is needed it can be achieved by overriding
    # this value. Note that the shutdown command needs to wait for the
    # application shutdown completely before exiting; see [the default
    # command](https://bitbucket.org/atlassian-docker/docker-atlassian-confluence-server/src/master/shutdown-wait.sh)
    # for details.
    #
    command: "/shutdown-wait.sh"

  # -- Specifies a list of additional arguments that can be passed to the Confluence JVM, e.g.
  # system properties.
  #
  additionalJvmArgs: []
  
  # -- Specifies a list of additional Java libraries that should be added to the
  # Confluence container. Each item in the list should specify the name of the volume
  # that contains the library, as well as the name of the library file within that
  # volume's root directory. Optionally, a subDirectory field can be included to
  # specify which directory in the volume contains the library file. Additional details:
  # https://atlassian.github.io/data-center-helm-charts/examples/external_libraries/EXTERNAL_LIBS/
  #
  additionalLibraries:
    - volumeName: shared-home
      subDirectory: libraries
      fileName: mysql-connector-java-8.0.22.jar
  #   - volumeName:
  #     subDirectory:
  #     fileName:

  # -- Specifies a list of additional Confluence plugins that should be added to the
  # Confluence container. Note plugins installed via this method will appear as
  # bundled plugins rather than user plugins. These should be specified in the same
  # manner as the 'additionalLibraries' property. Additional details:
  # https://atlassian.github.io/data-center-helm-charts/examples/external_libraries/EXTERNAL_LIBS/
  #
  # NOTE: only .jar files can be loaded using this approach. OBR's can be extracted
  # (unzipped) to access the associated .jar
  #
  # An alternative to this method is to install the plugins via "Manage Apps" in the
  # product system administration UI.
  #
  additionalBundledPlugins: []
  #   - volumeName:
  #     subDirectory:
  #     fileName:

  # -- Defines any additional volumes mounts for the Confluence container. These
  # can refer to existing volumes, or new volumes can be defined via
  # 'volumes.additional'.
  #
  additionalVolumeMounts: []

  # -- Defines any additional environment variables to be passed to the Confluence
  # container. See https://hub.docker.com/r/atlassian/confluence-server for
  # supported variables.
  #
  additionalEnvironmentVariables: []

  # -- Defines any additional ports for the Confluence container.
  #
  additionalPorts: []
  #  - name: jmx
  #    containerPort: 5555
  #    protocol: TCP

  # -- Defines additional volumeClaimTemplates that should be applied to the Confluence pod.
  # Note that this will not create any corresponding volume mounts;
  # those needs to be defined in confluence.additionalVolumeMounts
  #
  additionalVolumeClaimTemplates: []
  #  - name: myadditionalvolumeclaim
  #    storageClassName:
  #    resources:
  #      requests:
  #        storage: 1Gi

  # -- Defines topology spread constraints for Confluence pods. See details:
  # https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  #
  topologySpreadConstraints: []
  # - maxSkew: 1
  #   topologyKey: kubernetes.io/hostname
  #   whenUnsatisfiable: ScheduleAnyway
  #   labelSelector:
  #     matchLabels:
  #       app.kubernetes.io/name: confluence

  # Debugging
  #
  jvmDebug:
  
    # -- Set to 'true' for remote debugging. Confluence JVM will be started with debugging
    # port 5005 open.
    enabled: false

# Confluence Synchrony configuration
# https://confluence.atlassian.com/doc/configuring-synchrony-858772125.html
synchrony:

  # -- Set to 'true' if Synchrony (i.e. collaborative editing) should be enabled.
  # This will result in a separate StatefulSet and Service to be created for Synchrony.
  # If disabled, then collaborative editing will be disabled in Confluence.
  enabled: false
  
  # K8s Synchrony Service configuration
  #
  service:
  
    # -- The port on which the Synchrony K8s Service will listen
    #
    port: 80
    
    # -- The type of K8s service to use for Synchrony
    #
    type: NodePort

    # -- Use specific loadBalancerIP. Only applies to service type LoadBalancer.
    #
    loadBalancerIP:

  # -- Boolean to define whether to set synchrony home directory permissions on startup
  # of Synchrony container. Set to 'false' to disable this behaviour.
  #
  setPermissions: true

  # Port definitions
  #
  ports:
  
    # -- The port on which the Synchrony container listens for HTTP traffic
    #
    http: 8091
    
    # -- The port on which the Synchrony container listens for Hazelcast traffic
    #
    hazelcast: 5701
    
  # Confirm that Synchrony is up and running with a ReadinessProbe
  # https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#define-readiness-probes
  #
  readinessProbe:
  
    # -- The initial delay (in seconds) for the Synchrony container readiness probe,
    # after which the probe will start running.
    #
    initialDelaySeconds: 5
    
    # -- How often (in seconds) the Synchrony container readiness probe will run
    #
    periodSeconds: 1
    
    # -- The number of consecutive failures of the Synchrony container readiness probe
    # before the pod fails readiness checks.
    #
    failureThreshold: 10
  
  # Synchrony Pod resource requests
  #
  resources:
  
    # JVM Memory / Heap Size definitions. The values below are based on the
    # defaults defined for the Synchrony docker container.
    #
    jvm:

      # -- The maximum amount of heap memory that will be used by the Synchrony JVM
      #
      minHeap: "1g"
      
      # -- The minimum amount of heap memory that will be used by the Synchrony JVM
      #
      maxHeap: "2g"
      
      # -- The memory allocated for the Synchrony stack
      #
      stackSize: "2048k"
      
    # Specifies the standard K8s resource requests and/or limits for the Synchrony
    # container. It is important that if the memory resources are specified here,
    # they must allow for the size of the Synchrony JVM. That means the maximum heap
    # size, the reserved code cache size, plus other JVM overheads, must be
    # accommodated. Allowing for (maxHeap+codeCache)*1.5 would be an example.
    #
    container:
      requests:
        # -- Initial CPU request by Synchrony pod
        #
        cpu: "2"
        
        # -- Initial Memory request Synchrony pod
        #
        memory: "2.5G"

  # -- Specifies a list of additional arguments that can be passed to the Synchrony JVM, e.g.
  # system properties.
  #
  additionalJvmArgs: {}
    #- -Dsynchrony.example.system.property=46

  shutdown:
    # -- The termination grace period for pods during shutdown. This
    # should be set to the Synchrony internal grace period (default 20
    # seconds), plus a small buffer to allow the JVM to fully terminate.
    terminationGracePeriodSeconds: 25
        
  # -- The base URL of the Synchrony service. This will be the URL that users' browsers will
  # be given to communicate with Synchrony, as well as the URL that the Confluence service
  # will use to communicate directly with Synchrony, so the URL must be resolvable both from
  # inside and outside the Kubernetes cluster.
  ingressUrl:
  
  # -- Specifies a list of additional Java libraries that should be added to the
  # Synchrony container. Each item in the list should specify the name of the volume
  # that contains the library, as well as the name of the library file within that
  # volume's root directory. Optionally, a subDirectory field can be included to
  # specify which directory in the volume contains the library file. Additional details:
  # https://atlassian.github.io/data-center-helm-charts/examples/external_libraries/EXTERNAL_LIBS/
  #
  additionalLibraries:
    - volumeName: shared-home
      subDirectory: libraries
      fileName: mysql-connector-java-8.0.22.jar
  #   - volumeName:
  #     subDirectory:
  #     fileName:

  # -- Defines any additional volumes mounts for the Synchrony container. These
  # can refer to existing volumes, or new volumes can be defined via
  # 'volumes.additionalSynchrony'.
  #
  additionalVolumeMounts: []

  # -- Defines any additional ports for the Synchrony container.
  #
  additionalPorts: []
  #  - name: jmx
  #    containerPort: 5555
  #    protocol: TCP

  # -- Defines topology spread constraints for Synchrony pods. See details:
  # https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  #
  topologySpreadConstraints: []
  # - maxSkew: 1
  #   topologyKey: kubernetes.io/hostname
  #   whenUnsatisfiable: ScheduleAnyway
  #   labelSelector:
  #     matchLabels:
  #       app.kubernetes.io/name: confluence-synchrony

# Fluentd configuration
#
# Confluence log collection and aggregation can be enabled using Fluentd. This config
# assumes an existing ELK stack has been stood up and is available.
# https://www.fluentd.org/
#
fluentd:

  # -- Set to 'true' if the Fluentd sidecar (DaemonSet) should be added to each pod
  #
  enabled: false
  
  # -- The Fluentd sidecar image
  #
  imageName: fluent/fluentd-kubernetes-daemonset:v1.11.5-debian-elasticsearch7-1.2

  # -- The command used to start Fluentd. If not supplied the default command
  # will be used: "fluentd -c /fluentd/etc/fluent.conf -v"
  #
  # Note: The custom command can be free-form, however pay particular attention to
  # the process that should ultimately be left running in the container. This process
  # should be invoked with 'exec' so that signals are appropriately propagated to it,
  # for instance SIGTERM. An example of how such a command may look is:
  # "<command 1> && <command 2> && exec <primary command>"
  command:
  
  # -- Set to 'true' if a custom config (see 'configmap-fluentd.yaml' for default)
  # should be used for Fluentd. If enabled this config must be supplied via the
  # 'fluentdCustomConfig' property below.
  #
  customConfigFile: false
  
  # -- Custom fluent.conf file
  #
  fluentdCustomConfig: {}
  # fluent.conf: |
  #   <source>
  #     @type tail
  #     <parse>
  #     @type multiline
  #     format_firstline /\d{4}-\d{1,2}-\d{1,2}/
  #     </parse>
  #     path /opt/atlassian/confluence/logs/access_log.*
  #     pos_file /tmp/confluencelog.pos
  #     tag confluence-access-logs
  #   </source>

  # -- The port on which the Fluentd sidecar will listen
  #
  httpPort: 9880
  
  # Elasticsearch config based on your ELK stack
  #
  elasticsearch:
  
    # -- Set to 'true' if Fluentd should send all log events to an Elasticsearch service.
    #
    enabled: true
    
    # -- The hostname of the Elasticsearch service that Fluentd should send logs to.
    #
    hostname: elasticsearch
    
    # -- The prefix of the Elasticsearch index name that will be used
    #
    indexNamePrefix: confluence
    
  # -- Specify custom volumes to be added to Fluentd container (e.g. more log sources)
  #
  extraVolumes: []
  # - name: local-home
  #   mountPath: /opt/atlassian/confluence/logs
  #   subPath: log
  #   readOnly: true
  
  
# -- Custom annotations that will be applied to all Confluence pods
#
podAnnotations: {}
#  name: <value>

# -- Custom labels that will be applied to all Confluence pods
#
podLabels: {}
#  name: <value>

# -- Standard K8s node-selectors that will be applied to all Confluence pods
#
nodeSelector: {}
#  name: <value>

# -- Standard K8s tolerations that will be applied to all Confluence pods
#
tolerations: []
# - effect: <name>
#   operator: <operator>
#   key: <key>

# -- Standard K8s affinities that will be applied to all Confluence pods
#
affinity: {}
#  name: <value>

# -- Standard K8s schedulerName that will be applied to all Confluence pods.
# Check Kubernetes documentation on how to configure multiple schedulers:
# https://kubernetes.io/docs/tasks/extend-kubernetes/configure-multiple-schedulers/#specify-schedulers-for-pods
#
schedulerName:

# -- Additional container definitions that will be added to all Confluence pods
#
additionalContainers: []
#  - name: <name>
#    image: <image>:<tag>

# -- Additional initContainer definitions that will be added to all Confluence pods
#
additionalInitContainers: []
#  - name: <name>
#    image: <image>:<tag>

# -- Additional labels that should be applied to all resources
#
additionalLabels: {}
#  name: <value>

# -- Additional existing ConfigMaps and Secrets not managed by Helm that should be
# mounted into service container. Configuration details below (camelCase is important!):
  # 'name'      - References existing ConfigMap or secret name.
  # 'type'      - 'configMap' or 'secret'
  # 'key'       - The file name.
  # 'mountPath' - The destination directory in a container.
# VolumeMount and Volumes are added with this name and index position, for example;
# custom-config-0, keystore-2
#
additionalFiles: []
#  - name: custom-config
#    type: configMap
#    key: log4j.properties
#    mountPath:  /var/atlassian
#  - name: custom-config
#    type: configMap
#    key: web.xml
#    mountPath: /var/atlassian
#  - name: keystore
#    type: secret
#    key: keystore.jks
#    mountPath: /var/ssl

# -- Additional host aliases for each pod, equivalent to adding them to the /etc/hosts file.
# https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
additionalHosts: []
#  - ip: "127.0.0.1"
#    hostnames:
#    - "foo.local"
#    - "bar.local"