#!/bin/bash
# This series of tests are used to test the fail-over with ddl events of TiCDC.
# we start two TiCDC servers, and use failpoint to block the block event ddl execution of different situations
# and do restart to test the fail-over.

# This is the case-M of fail-over with ddl events.
# Node1: the table trigger event dispatcher meet the block event ddl, and report the status to maintainer,
# Node2: while the other dispatcher is not meet the block event ddl yet,
# then the two nodes are both restartes.
# --> we expect the cluster will get the correct table count and continue to sync the following events successfully.
#     1 ddl is drop databases
#     2 ddl is drop table
#     3 ddl is rename table
#     4 ddl is truncate table

set -eu

CUR=$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)
source $CUR/../_utils/test_prepare
WORK_DIR=$OUT_DIR/$TEST_NAME
CDC_BINARY=cdc.test
SINK_TYPE=$1
check_time=60

function prepare() {
	rm -rf $WORK_DIR && mkdir -p $WORK_DIR

	start_tidb_cluster --workdir $WORK_DIR

	# record tso before we create tables to skip the system table DDLs
	start_ts=$(run_cdc_cli_tso_query ${UP_PD_HOST_1} ${UP_PD_PORT_1})

	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0" --addr "127.0.0.1:8300"

	TOPIC_NAME="ticdc-failover-ddl-test-two-node-B-$RANDOM"
	case $SINK_TYPE in
	kafka) SINK_URI="kafka://127.0.0.1:9092/$TOPIC_NAME?protocol=open-protocol&partition-num=4&kafka-version=${KAFKA_VERSION}&max-message-bytes=10485760" ;;
	storage) SINK_URI="file://$WORK_DIR/storage_test/$TOPIC_NAME?protocol=canal-json&enable-tidb-extension=true" ;;
	pulsar)
		run_pulsar_cluster $WORK_DIR normal
		SINK_URI="pulsar://127.0.0.1:6650/$TOPIC_NAME?protocol=canal-json&enable-tidb-extension=true"
		;;
	*) SINK_URI="mysql://normal:123456@127.0.0.1:3306/" ;;
	esac
	do_retry 5 3 cdc_cli_changefeed create --start-ts=$start_ts --sink-uri="$SINK_URI" -c "test"
	case $SINK_TYPE in
	kafka) run_kafka_consumer $WORK_DIR "kafka://127.0.0.1:9092/$TOPIC_NAME?protocol=open-protocol&partition-num=4&version=${KAFKA_VERSION}&max-message-bytes=10485760" ;;
	storage) run_storage_consumer $WORK_DIR $SINK_URI "" "" ;;
	pulsar) run_pulsar_consumer --upstream-uri $SINK_URI ;;
	esac

	run_sql "drop database if exists fail_over_ddl_test;" ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "drop database if exists fail_over_ddl_test2;" ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "create database fail_over_ddl_test;" ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "create table fail_over_ddl_test.test1 (id int primary key, val int);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "create table fail_over_ddl_test.test2 (id int primary key, val int);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	check_table_exists fail_over_ddl_test.test2 ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT}
}

# ddl is drop database
function failOverCaseM-1() {
	prepare
	ret=$?
	if [ "$ret" != 0 ]; then
		exit 1
	fi

	# restart cdc server to enable failpoint
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")
	kill_cdc_pid $cdc_pid_1

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true)'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-1" --addr "127.0.0.1:8300"
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true);github.com/pingcap/ticdc/downstreamadapter/dispatcher/BlockOrWaitBeforeDealWithDDL=pause'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-1" --addr "127.0.0.1:8301"

	# move table 1 to node 2
	table_id=$(get_table_id "fail_over_ddl_test" "test1")
	move_table_with_retry "127.0.0.1:8301" $table_id "test" 10

	run_sql "drop database fail_over_ddl_test;" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	# ensure the ddl event reach the dispatchers
	sleep 15

	kill_cdc_pid $cdc_pid_1
	cdc_pid_2=$(get_cdc_pid "$CDC_HOST" "8301")
	kill_cdc_pid $cdc_pid_2

	export GO_FAILPOINTS=''
	# restart cdc server
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-2" --addr "127.0.0.1:8300"

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-2" --addr "127.0.0.1:8301"

	ensure 30 "run_sql 'show databases;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_not_contains 'fail_over_ddl_test'"

	## continue to write ddl and dml to test the cdc server is working well
	run_sql_file $CUR/data/prepare.sql ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	check_sync_diff $WORK_DIR $CUR/conf/diff_config.toml 60

	query_dispatcher_count "127.0.0.1:8300" "test" 3 10

	cleanup_process $CDC_BINARY
	stop_tidb_cluster

	echo "failOverCaseM-1 passed successfully"
}

# ddl is drop table
function failOverCaseM-2() {
	prepare
	ret=$?
	if [ "$ret" != 0 ]; then
		exit 1
	fi

	# restart cdc server to enable failpoint
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")
	kill_cdc_pid $cdc_pid_1

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true)'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-1" --addr "127.0.0.1:8300"
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true);github.com/pingcap/ticdc/downstreamadapter/dispatcher/BlockOrWaitBeforeDealWithDDL=pause'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-1" --addr "127.0.0.1:8301"

	# move table 1 to node 2
	table_id=$(get_table_id "fail_over_ddl_test" "test1")
	move_table_with_retry "127.0.0.1:8301" $table_id "test" 10

	run_sql "drop table fail_over_ddl_test.test1;" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	# ensure the ddl event reach the dispatchers
	sleep 15

	kill_cdc_pid $cdc_pid_1
	cdc_pid_2=$(get_cdc_pid "$CDC_HOST" "8301")
	kill_cdc_pid $cdc_pid_2

	export GO_FAILPOINTS=''

	# restart cdc server
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-2" --addr "127.0.0.1:8300"

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-2" --addr "127.0.0.1:8301"

	ensure 30 "run_sql 'use fail_over_ddl_test;show tables;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_not_contains 'test1'"

	ensure 30 "run_sql 'use fail_over_ddl_test;show tables;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_not_contains 'test1' && check_contains 'test2'"
	ret=$?
	if [ "$ret" != 0 ]; then
		exit 1
	fi

	## continue to write ddl and dml to test the cdc server is working well
	run_sql_file $CUR/data/prepare.sql ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "insert into fail_over_ddl_test.test2 values (1, 1);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	check_sync_diff $WORK_DIR $CUR/conf/diff_config.toml 60

	query_dispatcher_count "127.0.0.1:8300" "test" 4 10

	cleanup_process $CDC_BINARY
	stop_tidb_cluster

	echo "failOverCaseM-2 passed successfully"
}

# ddl is rename table
function failOverCaseM-3() {
	prepare
	ret=$?
	if [ "$ret" != 0 ]; then
		exit 1
	fi

	# restart cdc server to enable failpoint
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")
	kill_cdc_pid $cdc_pid_1

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true)'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-1" --addr "127.0.0.1:8300"
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true);github.com/pingcap/ticdc/downstreamadapter/dispatcher/BlockOrWaitBeforeDealWithDDL=pause'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-1" --addr "127.0.0.1:8301"
	# move table 1 to node 2
	table_id=$(get_table_id "fail_over_ddl_test" "test1")
	move_table_with_retry "127.0.0.1:8301" $table_id "test" 10

	run_sql "rename table fail_over_ddl_test.test1 to fail_over_ddl_test.test4;" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	# ensure the ddl event reach the dispatchers
	sleep 15

	kill_cdc_pid $cdc_pid_1
	cdc_pid_2=$(get_cdc_pid "$CDC_HOST" "8301")
	kill_cdc_pid $cdc_pid_2

	export GO_FAILPOINTS=''

	# restart cdc server
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-2" --addr "127.0.0.1:8300"

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-2" --addr "127.0.0.1:8301"

	## make ddl must reach the place and report to maintainer, and get the write status, and block in the place that report to maintainer
	ensure 30 "run_sql 'use fail_over_ddl_test;show tables;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_not_contains 'test1' && check_contains 'test4'"

	ensure 30 "run_sql 'use fail_over_ddl_test;show tables;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_not_contains 'test1' && check_contains 'test2' && check_contains 'test4'"

	ret=$?
	if [ "$ret" != 0 ]; then
		exit 1
	fi

	## continue to write ddl and dml to test the cdc server is working well
	run_sql_file $CUR/data/prepare.sql ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "insert into fail_over_ddl_test.test2 values (1, 1);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "insert into fail_over_ddl_test.test4 values (1, 1);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	check_sync_diff $WORK_DIR $CUR/conf/diff_config.toml 60

	query_dispatcher_count "127.0.0.1:8300" "test" 5 10

	cleanup_process $CDC_BINARY
	stop_tidb_cluster

	echo "failOverCaseM-3 passed successfully"
}

# ddl is truncate table
function failOverCaseM-4() {
	prepare
	ret=$?
	if [ "$ret" != 0 ]; then
		exit 1
	fi

	# restart cdc server to enable failpoint
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")
	kill_cdc_pid $cdc_pid_1

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true)'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-1" --addr "127.0.0.1:8300"
	cdc_pid_1=$(get_cdc_pid "$CDC_HOST" "$CDC_PORT")

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	export GO_FAILPOINTS='github.com/pingcap/ticdc/maintainer/scheduler/StopBalanceScheduler=return(true);github.com/pingcap/ticdc/downstreamadapter/dispatcher/BlockOrWaitBeforeDealWithDDL=pause'
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-1" --addr "127.0.0.1:8301"
	# move table 1 to node 2
	table_id=$(get_table_id "fail_over_ddl_test" "test1")
	move_table_with_retry "127.0.0.1:8301" $table_id "test" 10

	run_sql "insert into fail_over_ddl_test.test1 values (2, 2);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	ensure 10 "run_sql 'select id from fail_over_ddl_test.test1;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_contains '2'"

	run_sql "truncate table fail_over_ddl_test.test1;" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	# ensure the ddl event reach the dispatchers
	sleep 15

	kill_cdc_pid $cdc_pid_1
	cdc_pid_2=$(get_cdc_pid "$CDC_HOST" "8301")
	kill_cdc_pid $cdc_pid_2

	export GO_FAILPOINTS=''

	# restart cdc server
	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "0-2" --addr "127.0.0.1:8300"

	# make node1 to be the coordinator and maintainer
	check_coordinator_and_maintainer "127.0.0.1:8300" "test" 60

	run_cdc_server --workdir $WORK_DIR --binary $CDC_BINARY --logsuffix "1-2" --addr "127.0.0.1:8301"

	## make ddl must reach the place and report to maintainer, and get the write status, and block in the place that report to maintainer
	ensure 30 "run_sql 'select id from fail_over_ddl_test.test1;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_not_contains '2'"

	ensure 30 "run_sql 'use fail_over_ddl_test;show tables;' ${DOWN_TIDB_HOST} ${DOWN_TIDB_PORT} && check_contains 'test1' && check_contains 'test2'"

	ret=$?
	if [ "$ret" != 0 ]; then
		exit 1
	fi

	## continue to write ddl and dml to test the cdc server is working well
	run_sql_file $CUR/data/prepare.sql ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "insert into fail_over_ddl_test.test1 values (1, 1);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}
	run_sql "insert into fail_over_ddl_test.test2 values (1, 1);" ${UP_TIDB_HOST} ${UP_TIDB_PORT}

	check_sync_diff $WORK_DIR $CUR/conf/diff_config.toml 60

	query_dispatcher_count "127.0.0.1:8300" "test" 5 10

	cleanup_process $CDC_BINARY
	stop_tidb_cluster

	echo "failOverCaseM-4 passed successfully"
}

trap 'stop_test $WORK_DIR' EXIT
failOverCaseM-1
failOverCaseM-2
failOverCaseM-3
failOverCaseM-4
check_logs $WORK_DIR
echo "[$(date)] <<<<<< run test case $TEST_NAME success! >>>>>>"